Case Study

GE LM6000 1B Bearing Failure

There was no other indication of a problem from vibration, temperature or the chip detector in the 44 days of early warning from the MetalSCAN.

Case Study

GE LM2500 C-Sump Bearing Failure

Apart from slightly higher readings on the C-Sump scavenge temperature, no other engine parameters(including chip detector or vibration readings)indicated abnormalities.

Case Study

GE LM5000 Power Turbine Bearing Failure

The engine was running continuously up to the day of the maintenance period. The power turbine was replaced with minimal engine down time.

Case Study

Gastops Real-Time Diesel Engine Lubricant Condition

Gastops has developed a brand-new Oil Condition and Contamination Monitor (OCCM) which uses fluorescence spectroscopy to directly measure oil condition and contamination at the molecular level.

Case Study

Gastops OCCM in Diesel Marine Engines

Gastops has developed a brand-new Oil Condition and Contamination Monitor (OCCM) which uses fluorescence spectroscopy to directly measure oil condition and contamination at the molecular level.

Case Study

P&W FT8 Power Turbine Bearing Failure Event 2

Download

Case Study

P&W FT8 Power Turbine Bearing Failure Event 1

Download

Case Study

GE LM6000 1B Bearing Failure

Download

Case Study

GE LM2500 Seal Failure

Download

Case Study

GE LM2500 C-Sump Bearing Failure

Download

WordPress › Error

There has been a critical error on this website.

Learn more about troubleshooting WordPress.